ERW Pipes Ultrasonic Off-Line Ends
                  Delaminations Examinations

The Ends delaminations inspection system is placed after the hydro tester and provides full automatic examination.The system works in parallel mode and allows detecting the defects at 50% of the wall thickness, with a reference standard for calibration as a FBH of 3 or 6.25 mm diameter.The coverage is typically 50 mm with extension to 100 mm.

Tube manufacturing range
Pipe diameter range: 4" to 24"-114.3 to 600mm
Wall thickness range: 3 mm to 20mm
         The system includes:
-Paintbrush probe and 2 mechanical head
-Individual coupling control
-High stability
-Lateral ajustment of each channel



-UT settigs
-Amplitude measurment
-Rejects alarms on defects
-Coupling check at each shot
Automatic printing function
-Automatic full record
-Tracking connection


BD21300_0202 Ultrasonic probe
 -Dual crystal 52x4mm probe
-Self water couplant
-Wear SIC protection devices
 BD21300_0202 Ultrasonic Board
-SFT 4001HPCI 2 channels
-High pulse rate frequency
-High resolution
BD21300_0202Paint marking
monitoring including shift register for defects and coupling alarms



Please contact our Webmaster with questions or comments.
© Copyright 2012 SOFRATEST S.A.  All rights reserved.

ERW pipes Off-Line Ends Delaminations